A&D Weighing BA-125DTE Dual Range Semi-Microbalance with Touch Screen Display, Automatic Doors and Internal Calibration, 51 g x 0.01 mg / 120 g x 0.1 mg

The BA-125DTE provides 0.01 mg readability from 0 to 51 g and 0.1 mg readability above 51 g up to its 120 g maximum capacity. This dual-range design gives users very fine semi-micro resolution for smaller samples while still providing enough capacity for larger containers or samples. It can therefore cover applications that might otherwise require more than one laboratory balance.

Static electricity can be a significant source of weighing error when measuring at the 0.01 mg level, especially with plastics, powders, filters, glassware, and low-humidity environments. The BA-125DTE includes an ionizer as standard equipment to help neutralize electrostatic charges before weighing. This can improve measurement stability and reduce the risk of static-related errors in sensitive laboratory work.

Yes. The BA-125DTE features automatic internal self-calibration. Its built-in calibration system can adjust sensitivity in response to factors such as temperature variation, helping maintain consistent weighing performance without requiring the operator to manually place an external calibration weight on the pan for routine adjustment. This is especially valuable for regulated laboratories and environments where measurement consistency is critical.

The BA-125DTE's weighing-chamber doors can be operated automatically using IR sensors, reducing the need to manually touch and slide the doors during repetitive weighing. This can make sample loading faster while also reducing physical contact with the balance. Combined with the 5-inch color touchscreen, the system is designed to make frequent semi-micro weighing more efficient and user-friendly.

A&D specifies 0.030 mg repeatability at a 50 g test load and 0.1 mg repeatability at 100 g, with ±0.2 mg linearity. The typical minimum weight is listed as 50 mg. Stabilization is approximately 7 seconds in the 0.01 mg range and 3 seconds in the 0.1 mg range when configured for FAST response, making the BA-125DTE suitable for demanding analytical and semi-micro weighing workflows where both sensitivity and productivity matter.