Sartorius BCE124-1S Entris II Essential Analytical Balance, 120 g x 0.0001 g

The Sartorius BCE124-1S is designed for precise laboratory weighing applications that require measurements down to 0.0001 g (0.1 mg). With a maximum capacity of 120 g, it is well suited for sample preparation, formulation, quality control, chemical analysis, research, and other applications where highly accurate weight measurements are important.

The Sartorius BCE124-1S uses external calibration, meaning an appropriate external calibration weight is required to check and adjust the balance. Sartorius specifies a 100 g E2 calibration weight for this model. Users who prefer automated internal adjustment should consider an Entris II model specifically equipped with internal isoCAL functionality.

The BCE124-1S provides a readability of 0.0001 g (0.1 mg) with typical repeatability of 0.1 mg and linearity of approximately 0.2 mg. These specifications make it suitable for demanding laboratory applications where small differences in sample mass need to be detected reliably.

Yes. The BCE124-1S includes a manual draft shield with a weighing chamber height of approximately 240 mm. The enclosed weighing area helps protect sensitive 0.1 mg measurements from air movement and other environmental disturbances that could affect weighing stability.

Yes. The BCE124-1S provides RS232 and USB-C connectivity, allowing weighing data to be transferred to compatible external devices and computer-based workflows. The DSC Balances product information also notes that direct PC data transfer is available with the appropriate connection setup, making the balance useful for laboratories that need efficient recording and management of weighing results.